Description
Zinsser Ceiling Pro 5-in-1 seals, primes, covers stains, bridges cracks and finishes ceilings, for a perfectly finished ceiling every time. Recoatable in just one hour, low odour and low VOC content.
Designed with ground-breaking paint technology, Zinsser Ceiling Pro 5-in-1 effortlessly provides a perfectly finished ceiling every time. It adheres to any surface, seals stains (including water and smoke stains), primes and finishes whilst bridging hairline cracks. It contains a biocide that protects the finished, dried coating from fungal degradation, thereby significantly extending the life of the finish.
Preparation
- Ensure surfaces are sound, clean, dry and free of any contamination, such as dust, dirt, grease or wax.
- Remove any existing mould or mildew before painting.
- Remove any excessive dusting of new before painting.
- Ensure surface has moisture content of less than 15%.
- Exposed nail heads should be countersunk and filled before coating.
Application
- Stir thoroughly before use.
- Do not mix with conventional emulsion paints.
- Ensure application equipment is thoroughly clean before use.
- Only apply when air temperature is between 10? and 30?C.
- Not suitable for application to bare ferrous metal.
- Apply by brush, roller or airless spray.
- If spraying use tip size 0.015? – 0.019? at 2000 ? 2500 psi.
- For brush and roller no thinning is required.
- If spraying, Ceiling Pro 5-in-1 may be thinned up to 5% with clean water.
- Lower temperature and high humidity may extent drying and recoat times.
- Covering dark surfaces or stubborn stains may require two coats.
For further information please consult the Safety Data Sheet and Technical Data Sheet attached.
Living-room 
Bedroom