Description
Bedec Aqua Advanced Matt White & Black is a high quality, quick drying, non-yellowing water based paint. Suitable for interior and exterior use. Bedec Aqua Advanced Matt White & Black incorporates Bedec’s unique approach to innovation in water based technology with excellent flow, ease of application, and a long lasting flexible finish. Used and approved by professional decorators who find the Bedec water based range to be excellent quality.
Application
Apply by brush, roller, conventional H.V.L.P or airless spray. Make sure to stir well and always check colour before use. We recommend using a test area first whenever possible. Do not apply at air or surface temperatures below 8?C. On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.
Coverage
The manufacturer estimates the coverage rate, when applied by a brush or roller, to be approximately 10-12 square metres per litre per coat. The coverage will depend upon the texture and porosity of the substrate. Spraying this product can considerably reduce the coverage rate depending on the type of spray equipment used. Check the technical data sheet attached or the Bedec product page for further details.
Drying Time
Drying time is subject to conditions. The manufacturer estimates that the painted surface will be touch dry after 30 minutes, and recoatable after 4 hours.
Safety Information
- Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
- If you require medical advice, have the tin and/or label at hand.
- Ensure good ventilation during application and drying. Wear respiratory protection if spraying the product.
- Do not get in eyes, on skin or on clothing.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and then continue rinsing.
- IF ON SKIN: Wash with plenty of water. Do not use solvent or thinners or white spirit.
- IF SWALLOWED: Call a POISON CENTRE or doctor if you feel unwell at all.