Blackfriar Anti-Climb Paint is a non setting slippery coating made from petroleum wax to prevent intruders. The non setting formula will cover the hands and clothing of intruders, while the slippery formulation will further prevent access, making surfaces almost unclimbable, particularly when applied to drain pipes. Protect your property by coating your fencing, walls, windowsills and more.
Blackfriar Anti-Climb Paint can be used on exterior brickwork, concrete, plastic, metal or wood. Apply via brush or mit. The manufacturer estimates a coverage rate of 2m² per litre.
Ensure the surface to be painted is sound, clean and dry. Scrape off any old or flaking paint until you have a firm surface. Porous surfaces should be sealed with Blackfriar Professional Solvent Based Floor Sealer. Bare steel after cleaning should be given one coat of Blackfriar Red Oxide Zinc Phosphate Primer. Plastic downcomers should be roughened by rubbing with medium grade abrasive paper.
Apply liberally with a stiff brush or lambs wool mitt. On bare or new surfaces first apply Blackfriar Professional Solvent Based Floor Sealer followed by 1 coat of Blackfriar Professional Anti-Climb Paint. On previously painted surfaces apply 1 coat as required. Only apply to areas not subject to legitimate daily contact usually limited to areas above 6 feet. Blackfriar Professional Anti-Climb Paint works best on surfaces or in areas below 35°C. The product will attract a surface layer of dust but this will not affect performance.
- Keep out of reach of children.
- Read label before use.
- Flammable liquid and vapour. Keep away from heat, sparks, open flames, hot surfaces.
- Use only in well-ventilated areas. May cause drowsiness or dizziness.
- If on skin, rinse skin with water or shower as soon as possible.
- If medical advice is needed, have product container or label at hand.
Remove as much product from application equipment as possible before washing with White Spirits. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.