Blackfriar Problem Solving Primer

Description

Blackfriar Problem Solving Primer is a multi-purpose primer formulated to cover a whole range of surfaces and surface problems. It seals difficult stains caused by water or mould and provides excellent adhesion to a range of surfaces. For use under most finishes including emulsion, gloss, and lightweight wallpapers.

Effectively covers most stains including:

• Nicotine
• Water
• Adhesive residues
• Soot
• Wood tannins

Works on a variety of surfaces, such as:

• Ceramic tiles
• Most plastics
• MDF
• Wood

Preparation

Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination.

Application

• Stir Blackfriar Problem Solving Primer thoroughly prior to use with a broad stirrer.
• The product may be applied by brush, roller or spray.
• Apply one or two coats as required.
• Thinning is not recommended.
• Coverage – Up to 10 square metres per litre per coat.
• Drying Time – Touch dry in 1 – 2 hours. Recoat after 4 hours. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.

Limitations

• Do not use Blackfriar Problem Solving Primer under cold (less than 10°C), damp or humid conditions.
• Do not apply to damp or wet surfaces.
• Do not cross contaminate with other water based coatings – use clean, dry brushes and application equipment.
• If used as a stain blocker the surface must be completely dry.
• For heavy staining more than one coat may be required.
• Take care if tinting – do not tint with other types of water-based paint, even some universal colourants may not be compatible – a test sample is advised.

Clean Up

• Remove as much product as possible from application equipment before washing with water.
• Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Storage

• Store Blackfriar Problem Solving Primer in a dry, safe place.
• Do not store in environments where extreme temperatures may occur.
• Keep within 5-30°C.
• Do not store in direct sunlight.
• Keep out of reach of children.
• Read label before use.
• If medical advice is needed, have product container or label at hand.
• Dispose of contents and container in accordance with all local, regional, national and international regulations.
• May produce an allergic reaction.