Owatrol Seasonite Transparent

Description

Owatrol Seasonite is a ground-breaking product for protecting new wood during its most vulnerable first year. When new wood is first exposed to the elements it is particularly vulnerable from the effects of excessive moisture and UV rays. Seasonite is unique unlike conventional water repellents it reduces damage due to sun and UV it helps to keep wood looking new for longer, it helps to stabilize new wood and is suitable for soft, hardwood species, pressure treated, kiln dried. Seasonite protects from the damaging effects of excessive moisture and UV rays – which can cause warping and cracking. For weather timber use Nettrol and Textrol, please don’t hesitate to ring for advice.

Owatrol Seasonite can be applied to both vertical and horizontal surfaces and requires just a single generous coat. It can be applied with a brush and is ideal for softwoods, especially pressure-treated wood. It allows the wood to weather naturally for its first year and prepares it for re-coating after 6-12 months of weathering. Seasonite dramatically reduces the risk of damage to your new wood structures during the first winter and allows the pores of the wood to open naturally. It minimises the greying and weathering process and after 6-12 months of weathering (6-9 months for softwood and 12 months for hardwood), Seasonite provides a sound surface for paint, wood stain or other finishes to be applied to.

Ideal Uses

• Protecting your new deck
• Keeping your new summer house looking new for longer
• Preventing warping in your new fence panels
• Protecting new unfinished garden furniture
• Preparing new wood for re-coating after weathering

Please Note

• Cover everything you do not wish to coat, including plants and shrubs.
• Apply between 10°C and 30°C. Do not apply in direct sunlight or to hot surfaces.
• Do not apply if cold and/or wet weather is expected within 24 hours.
• Shake or stir can thoroughly before use. Do not thin.
• Always work the entire length of a deck board or horizontal cladding to a logical break, such as a window or door frame and never stop application in the middle of the wall.
• Vertical cladding should be coated from top to bottom.
• After spray application, always back-brush or back-roll to improve penetration and uniformity of coverage.
• DO NOT use Seasonite on Oak.