Teknos Futura Aqua 40 White & Black (40% Sheen) is an excellent high quality paint suitable for interior or exterior use on to wooden windows, doors, gates, and much more. The high opacity finish is also highly suited to painting kitchen cupboards and furniture. A unique tough durable formulation allows for easy application with good hold and a durable, lasting finish.
Teknos Futura Aqua 40 White & Black is a water-borne urethane alkyd based top coat designed with detached and fixed furniture in mind – both interior and exterior.
Indoors FUTURA AQUA 40 is suitable for a wide array of primed surfaces, including painted wood, metal and building board surfaces: doors, window casements, cabinets, mouldings, panels, panel ceilings, air ducts, staircase railings, radiators and piping systems. FUTURA AQUA 40 is also suitable for plaster and filler surfaces primed with FUTURA AQUA PRIMER, for example window sills and casings, and wall surfaces in special objects, e.g. staircases.
Outdoors FUTURA AQUA 40 is ideal for painting primed window casements, doors, garden furniture, and more.
The surface must be clean and free from any possible contaminants. Teknos recommend washing previously painted surfaces, sanding down hard or gloss surfaces and smoothing out any irregularities in the surface.
Prime wood fibre board and building board surfaces as well as galvanized metal surfaces with FUTURA AQUA PRIMER adhesion primer.
Prime rusting steel surfaces as well as aluminium and copper surfaces with FERREX AQUA anti-corrosive paint.
Apply via varnish brush, mohair roller, painting pad, spray, airless spraying, air-assisted airlesss praying or electrostatic spraying.
Always stir thoroughly before use. Ensure the surface to be painted is dry.
During application and drying the temperature of the air, the surface and the product should all be above 10°C and the relative air humidiity should be below 80%. Further details are available in the technical data sheet attached (see the Download tab).
The drying times will vary as influenced by different surface attributes, humidity, temperature and ventilation. The following drying times were determined at 23°C and 50% relative humidity:
Dry to recoat: 8 hours.
Through dry: 2-3 days.
Final hardness and durability: Approx. 1 month.
The drying time may be extended by cold and/or damp conditions.
• May produce an allergic reaction.
• If you need medical advice have the tin and/or label at hand.
• Ensure good ventilation during application and drying. Wear respiratory protection if spraying the product.
• Do not get in eyes, on skin or on clothing.
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do, and then continue rinsing.
• IF ON SKIN: Wash with plenty of water. Do not use solvent or thinners or white spirit.
• IF SWALLOWED: Call a POISON CENTRE or doctor if you feel unwell at all.