Teknos Woodex Aqua Classic | Translucent Wood Stain

£11.15£78.12 inc VAT

  • Matt Finish
  • Protects wooden surfaces from moisture 
  • Protects wooden surfaces from UV degradation when tinted.
  • Coverage: Rough Sawn Timber 5 – 8 ㎡ per 1lt
  • Coverage: Planed Timber 8 – 12 ㎡ per 1lt
  • Application: Brush or Spray
  • For more Information please ring 0191 349 9990
  • Due to screen resolutions, differing timber species colours shown are example only. We strongly recommend doing samples first
  • All Translucent finishes are mixed to order and Non returnable
  • Be Aware Stains & Translucent finishes will appear different on different Timber Species

STEP 1 - Select Color:

Try different shades of each color range

Compare

Description

Teknos Woodex Aqua Classic, a water-borne, hybrid binder-based, non-film-forming transparent wood stain designed for outdoor use. This innovative product is formulated to safeguard wooden surfaces from the damaging effects of moisture, soiling, and UV radiation from the sun when tinted. Ideal for new wood or wood previously treated with non-film-forming wood stains, such as walls, doors, window frames, fences, poles, and especially recommended for log surfaces.

It is important to note that WOODEX AQUA CLASSIC is not suitable for use on film-forming wood stains or in environments like greenhouses, hotbeds, or shelters for livestock. For optimal protection against wood discoloration caused by UV radiation, tinting is recommended. Choosing this advanced wood stain not only enhances the appearance of your outdoor wooden structures but also extends their lifespan by providing a durable and protective finish.

SURFACE PREPARATION

Remove all loose matter, dirt and dust with wire-brush, scrubbing brush or scraper. For untreated wood priming with a wood preservative from the WOODEX series is recommended. Allow to dry for one day. Wash dirty and/or mildewed surfaces with RENSA FACADE facade cleaner. Rinse the surfaces thoroughly with water and allow to dry.

APPLICATION

Stir WOODEX AQUA CLASSIC thoroughly before use. Reserve a sufficient amount of wood stain in the same vessel for each uniform surface, to avoid colour differences. The wood stain must also be stirred now and then in the course of work. Apply WOODEX AQUA CLASSIC by brush or spray. Coat untreated wood once or twice with WOODEX AQUA CLASSIC depending on the colour intensity and the required result. The wood stain is applied evenly and continuously on the whole length of the beam or timber to avoid making restart points. Treat end grain with special care. Brush application is recommended for the first coat. When spray is used, the surface is finished by smoothing with a brush. It is not recommended that clear wood stain is used alone. Maintenance painting for wooden surfaces treated with WOODEX AQUA CLASSIC may be made with Teknos´s water and solvent-based wood stains as well as with house paints.

APPLICATION CONDITIONS

The surface to be treated must be dry. The moisture of the wood must be below 20 % of the dry weight of the wood. During the application and drying period the temperature of the ambient air, the surface and the wood stain shall be above +5 °C and the relative air humidity below 80 %. Avoid application in direct sunlight.
  • Due to screen resolutions, differing timber species colours shown are example only. We strongly recommend doing samples first
  • All Translucent finishes are mixed to order and Non returnable
  • Be Aware Stains & Translucent finishes will appear different on different Timber Species

Additional information

Colour

1801, 1802, 1803, 1804, 1805, 1806, 1807, 1808, 1809, 1810, 1811, 18012, 1813, 1814, 1815, 1816, 1817, 1819, 1820, 1821, 1822, 1823, 1824, 1825, 1826, 1827, 1828, 1829, 1830, 1831, 1832, 1833, 1834

Size

0.9lt, 2.7lt, 9lt

Paint Colors Visualizer

Tones
    Search colours by name:
    Colours

      Click on tones images to show colors here
    Living-room

    Selected color:

    Select options This product has multiple variants. The options may be chosen on the product page