Treatex Hardwax Oil Ultra Clear

Description

Treatex Hardwax Oil Ultra Clear is the new generation hard wearing wood oil suitable for all interior timber surfaces work tops, floors, doors furniture or even toys, very easy to apply by brush or roller. Manufactured from natural waxes and oils such as Carnuba, candilla waxes, Jojoba and linseed oils. Ultra is designed to enhance and protect the natural beauty of all interior timber surfaces. For trade Treatex Hardwax Oil Ultra Clear can be buffed after application, 45 minutes after a second coat job done – completed to a hard wearing durable finish increasing productivity.

Application Method 1 when buffing the first coat with a machine

• Sand 120-150 grit – Hardwax Oil should always be applied to bare timber or over a previous coat of Hardwax Oil
• Apply a thin coat of ULTRA using a good quality roller
• Leave for 10 minutes
• Slow buff with a soft pad to remove excess
• Finish using a lint free cloth under the buffer
• Leave for 45 minutes to dry with good ventilation
• Apply the final coat with best quality microfibre roller – do not buff this coat as there won’t be enough product left on the timber to protect properly
• Usually ready for use after 8 hours
• Usually ready for furniture after 18 hours

Application Method 2 when applying with a brush or roller

• Sand 100-150 grit – Hardwax Oil should always be applied to bare timber or over a previous coat of Hardwax Oil
• Apply the first coat using a good quality brush or roller – do not apply thickly – this will result in extended drying times
• First coat will usually be dry within 3-6 hours with good ventilation and airflow
• Apply the second coat using a good quality brush or roller
• Usually ready for use after 8 hours
• Usually ready for furniture after 18 hours

PLEASE NOTE – It is recommended to complete a small test area before commencing your job.