Zinsser B-I-N Primer Sealer

Description

Zinsser B-I-N Primer Sealer is a 3 in 1 primer, sealer and stain killer. Ideal for use on interior surfaces and for spot priming of exterior surfaces.

The shellac-based B-I-N primer offers exceptional adhesion to glossy surfaces – including glass – without the need for scuff sanding. It also features excellent stain blocking properties and?seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. The ideal antidote to water stains, nicotine stains, fungal degradation, oil stains, and loads more.

Zinsser B-I-N Primer Sealer permanently blocks every kind of odour, from smoke and fire damage to pets. Its dried film is non-toxic and hypo-allergenic, which means that it may be used in areas where incidental contact with food items occur. A top choice for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood.

Preparation

• Surfaces should be sound, clean, dry, and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper, adhesive or any contamination that may interfere with adhesion.
• If unsure, always wash surface with an appropriate ammoniated cleaning solution or solvent (do not use trisodium phosphate based cleaners).
• Remove any peeling and/or unsound coatings. Sand any remaining paint film edges smooth.
• Lightly sand exposed exterior wood with 80 to 100 grit sandpaper to remove loose or weathered wood fibres and mill glaze.
• When priming over stained areas, first attempt to remove as much of the stain as possible by washing, sanding, scraping, etc.
• Countersink exposed nail heads, spot-prime and fill all nail holes and gouges.
• Remove interior mould and mildew before painting with a solution of one-cup household bleach per 5 litres of water or a quality biocidal wash. Rinse well. Always wear protective clothing and goggles to prevent eye and skin contact with bleach. Do not mix ammonia or any other chemical with bleach solution.
• If you are concerned about mould and mildew behind walls, underneath flooring, in ventilation systems or other unseen areas, contact a professional who specializes in mould and mildew remediation. For commercial buildings and schools follow appropriate guidelines for mould removal.
• Remove rust and wipe metal with a cloth dampened in?alcohol then apply a rust-inhibitive primer.

Application

• Apply when air and surface temperature is between -1?and 32?C and relative humidity is less than 70%.
• Do not apply B-I-N if surface temperature is within 15% of the dew point.
• Substrate moisture content should not exceed 12%.
• Shake or stir well before using.
• Eliminate all sources of ignition.
• In most cases only one coat is necessary to prime most surfaces. If excessive absorption occurs over very porous substrates a second coat may be necessary.
• Spot priming is recommended only under high-hiding topcoat paints. For best results prime entire surface before painting.
• Keep container closed when not in use.
• Do not thin this product.

For further information consult the Technical Data Sheet and Safety Data Sheet attached.